Double Glazing Lock Repairs
The best locks for your doors and windows will stop burglars from entering your home. In general, they don't enjoy breaking glass or trying to wiggle through windows that are open.
Certain double glazing owners however, have encountered issues with their window or door lock after installing. Luckily, these problems are often fixable without having to purchase new double glazing.
Broken or damaged locks
A locksmith can fix your uPVC window lock or door lock if damaged or broken. They can repair hinges, striker plates, and locks for double glazing. They will also be able to reposition the cylinder to fix any misalignment issues that may be causing your handle to not work properly.
The mechanism could be seized when the key is inserted into the lock, but it does not turn or is difficult to insert. This could be due to grime or dirt getting stuck inside the mechanism. If double glazing repairs near me is the situation it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant needs to get into the mechanism, and the lock should be able to turn effortlessly.
The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They may loosen and fall out or break completely and stop the lock from working correctly. A screwdriver can be used to tighten these screws however, it is important not to over-tighten them since this could damage the internal components.
A faulty lock can be dangerous for you and your family members, especially if you have small children. They can open the door without knowing, giving them access to your house. If you're worried about the possibility that this could occur, a licensed professional locksmith can assist you re-secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on both uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.
Handles that are damaged or damaged
Many double-glazed windows have a multi-point lock as a part of the overall security package. This is a great choice for those worried about opportunistic thieves looking for ways to gain access to your home. It's also worth asking your installer about anti-lift blocks, these can be fitted with the existing locks and ensure that your window is locked in the closed position.
It's not uncommon for the handle locks to get damaged or fail. They are the first component of your window to be forced open by criminals who want to break into. The good news is that this is one of the easiest parts to fix.
Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to resist forced entry. This security upgrade is often available as an extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional option on double-glazed window installations.
If a handle is damaged, it's important to get this repaired as quickly as you can. Handles that are damaged can prevent the window from closing properly and letting in a draft. It could also be a weak point that burglars who are opportunistic could exploit, putting your family and belongings at risk of being stolen.
The process of repairing the failed mechanism starts with gaining access to the window frame and removing the damaged handle. The gearbox is then accessed to determine the type of gearbox used to open the handle. This will permit to replace the handle that matches the profile and the internal window frame mechanisms.
After the mechanism has been repaired the handle can be reattached using the original screws. However, we recommend replacing them with more long screws as they will provide an even more secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further deterioration. After that the window will be functional again and at only a fraction of the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows don't close correctly, draughts may enter your home, the security barriers will weaken and there's an increased chance of damp or water damage. Window hinges that break or fail are a common occurrence and are easily fixed.
If your uPVC windows don't close or open and close, it's likely the hinges require to be repaired or replaced. While most window manufacturers require you to purchase a whole new window unit in order to fix this simple problem We're able to repair the hinges that are damaged and save you money.
Window hinges may break from repeated use or they may be weakened through rust over time. If you find a broken hinge, it is important to take precautions to avoid further damage by taking care not to make the window swing open or closed.
You can find the right parts for your hinge by identifying its type. Maco, Mila and Roto are all brands of window hinges. Get advice from a professional before buying parts that do not fit with your existing hardware. This could cause more damage.
The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be a major source of noise and can also allow for water infiltration which can damage your windows.
Verify that the pin barrels on both sides of the hinge are aligned. If it's not tapping the headpin, use a hammer in order to create an incline in the hinge barrel. This will hold the pin in its place. A friend can help you hold the doors as you remove hinge screws and hinges. Replace the hinges with those of a matching size and install the screws with glue. Finally fix the hinges using clamps or weights while the glue is drying.
After you have repaired your hinges, you are able to reinstall the door. You could also reattach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw so that they match up with each other.
Broken or faulty glass
While uPVC windows do an excellent job of keeping the cold out and the heat in, they may become damaged over time. This can be the case with broken or damaged glass, as well as faulty locks. If not taken care of, it can be a costly problem. It can also affect the aesthetics of your house and may lead to a loss of insulation, which is why it is essential to fix any damage as soon as possible.
You can repair the crack in your glass yourself if you have the appropriate tools and techniques. Be sure that the area surrounding the broken glass is clear of debris to ensure that shards do not cause injury or trip hazards. After that, take away any broken glass pieces and dispose of them in the appropriate way. Then, apply masking tape over the entire area to keep shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to adhering it to the wall is an ideal option if you are dealing with a window that has two panes. This will ensure you have enough space to finish your project.
Before applying the glue, clean the entire surface of the broken frame and the glass with a a dry, clean cloth. Follow the curing and application directions that differ from product to product. Based on the direction of the crack, you may want to secure the glass to hold it in place while it is curing. You can do this using lightweight clamps that are designed to hold fragile materials.
After the adhesive has cured, carefully install the glass in the window frame. Make sure it is flush with the frame edge and that there aren't gaps between the glass sash as well as the frame. Be cautious not to flex the window when it's being installed, as this could weaken the seal and lead to condensation and water infiltration.
Get in touch with a professional glazier, like O'Brien(r), to arrange an appointment to replace your glass if the window is completely broken. Leaving broken glass unattended can be a risk to children and pets, so it's essential to act quickly.